Product added to cart
DrizAir 1200 - Item #AM0015
$2,200.00
In stock
SKU
AM0015
This compact, highly maneuverable standard dehumidifier removes moisture from everyday spills and reduces humidity in basements, facilities or on construction sites.
The Dri-Eaz DrizAir 1200 dehumidifier (F203) has all the convenient features of its larger cousins in a compact and extremely portable size. A proven favorite of water damage restoration professionals!
The Dri-Eaz 1200 combines proven design with professional performance and portability. The rotomolded polyethylene housing is dent resistant, offers superior durability, and helps to protect furnishings when in use. This mobile dehumidifier stacks up to two units high for storage. A rigid handle and semi-pneumatic wheels ensure easy transport and maneuverability.
Dri-Eaz dehumidifiers reduce humidity in enclosed structural environments by removing water vapor from the air. With proper use, the Dri-Eaz 1200 can help dry wet materials like carpet, carpet pad, floors, walls, building contents and more. Using Dri-Eaz dehumidifiers may also prevent secondary damage caused by high humidity.
How the DrizAir dehumidifiers works
DrizAir refrigerant dehumidifiers operate by pulling moist air in across a very cold evaporator core. The moisture condenses (freezes) on the coil. At intervals, the machine will go into defrost mode, warming the frost back to water. The water collects in a tray and leaves the unit through a drain hose or pump.
- Removes up to 15 gallons a day
- Super convenient size
- Hot-gas bypass for fast defrost
- Rugged rotomolded housing - stackable!
- Electronic touch-pad controls
- Rigid handle - designed for rugged service
- Semi-pneumatic wheels for easy transport
- Built-in duct attachment ring
Specifications
- Type: Standard Refrigerant
- Dimensions H × W × D: 32 × 20 × 19.5 in. 83 × 50 × 50 cm
- Use Weight: 80 lbs | 36 kg
- Water Removal Max (90°F/90% RH): 123.3 pints/day 62.6 L/day
- Water Removal AHAM (80°F/60%RH): 64 pints/day 30 L/day
- Operating Range: 33°-100°F 1°-38°C
- Compressor Type: 6670 BTU Rotary
- Defrost Type: Hot-gas bypass
- Process Air: 227 CFM
- Controls: Electronic Touchpad
- Water Pump-Out: Centrifugal
- Drain Hose Length: 40 ft
- Air Filter: HAF (High Airflow Filters)
- Wheels: Semi-pneumatic
- Handle: Rigid
- Stackable: Stack 2 units for storage
- Housing: Rotomolded polyethylene
- Power 115V: 6.4 amps
| Brand | Dri-Eaz |
|---|---|
| Dimensions | 32 × 20 × 19.5 in |
| Air Filtration Tool Type | Dehumidifier |
| Equipment Style/Type | Standard Refrigerant |
| CFM | 227 |
| Water Removal | Max: 123.3 pints/day 62.6 L/day AHAM: 64 pints/day 30 L/day |
| Operating Range | 33°-100°F 1°-38°C |
| Compressor Type | 6670 BTU Rotary |
| Controls | Electronic Touchpad |
| Water Pump-Out | Centrifugal |
| Current | 6.4 Amp |
| Voltage | 115V |
| Construction | Rotomolded polyethylene |
| Filtration | HAF (High Airflow Filters) |
| Equipment Features | Stackable |
Positioning a Dehumidifier
For best results, operate your dehumidifiers in an enclosed area, as this creates a drying chamber. Close all doors and windows that open to the outside to maximize the unit’s water removal efficiency. Also, keep traffic though the drying chamber to a minimum. Place your 1200 dehumidifier against a wall, away from
obstructions, and keep it away from anything that could block airflow into and out of the unit.
Managing temperature rise
DrizAir dehumidifiers warm the air as they remove moisture. Optimal drying temperatures range from 68−85°F (20−29°C). The most accurate way to monitor temperature is with a thermo-hygrometer; however, you can use an indoor/outdoor thermometer to gauge temperature. Just make sure it is located in the center of the room away from the airflow of the dehumidifier. If the temperature rises to unsafe levels (over 90°F/32°C) you can use the structure’s HVAC (heating air conditioning) system to bring the temperature down. Just set it to 80°F (27°C), and continue to operate the dehumidifier.
Operating your Dehumidifier
Set unit upright
Always operate the dehumidifier in an upright position. If the unit has been stored or transported in a horizontal position, set it upright (vertical) for at least 30 minutes before operating it. When the unit is placed in a horizontal, oil from the compressor flows into the refrigerant coils reducing the ability of the dehumidifier to function.
Set up drain hose
The 1200 condensate pump connects to a plastic drainage hose that is wrapped around the air outlet located at the back of the unit. Unwrap the entire hose
and place the unattached end in a sink, drain, bucket or outside – anywhere that water can drain out safely. If you use a bucket or other receptacle for water collection, check it regularly to prevent spills.
Plug in electrical cord
Locate the electrical cord either on the top or back of the unit. The 1200 dehumidifier may be plugged in to a 115- volt (15 amp) grounded outlet, which is standard in most homes. If the unit experiences a loss of power, either from a power interruption or from thermal overload protection, let the unit rest for five minutes before restarting. Otherwise it might shut off again.
Turn the unit on
Press the “on” button on the touchpad.
Write Your Own Review
