Product added to cart
Pre-filter for HEPA on Pullman Holt #102ASB Vacuum
$5.78
In stock
SKU
VP1035
The Pullman-Holt HEPA Prefilter, 9.25" x 7.5", for 102ASB Series vacuums. This provides final protection to the HEPA filter from premature failure due to clogging.
HEPA Pre-filter for Pullman Holt #102ASB Vacuum
This impact filter is about one inch thick and is attached to the inlet (bottom) surface of each HEPA filter. Its function is to provide final protection to the HEPA filter from premature failure due to clogging.
| Brand | Pullman-Holt |
|---|---|
| Dimensions | 9.25" x 7.5" |
| Air Filtration Tool Type | Pre-filter |
| Equipment Usage | For 102ASB Series |
Disposable Bag Changing:
We recommend that you replace your disposable paper filter bag frequently to improve the life and performance of your vacuum. It is also strongly recommended that you only purchase high quality Pullman-Holt replacement disposable paper filter bags.
IMPORTANT: When vacuuming hazardous materials, we recommend the following procedure for replacing the disposable paper filter bag.
- Remove vacuum head and HEPA filter.
- Tape a 6-mil poly bag over the canister so that the canister is completely enclosed.
- Using the poly bag as a glove, disengage the disposable paper filter bag from the vacuum inlet stem inside the canister.
- Invert the canister so that the disposable paper fi lter bag falls into the poly bag. Seal the poly bag and dispose as prescribed by law.
- Attach a new disposable paper fi lter bag to the vacuum inlet securely and fold the top of the bag down so it does not interfere with the HEPA filter.
- Replace the HEPA filter and motor head.
- Thoroughly vacuum the work area to recover any hazardous dust which may have been dropped.
Write Your Own Review
Related Products
We found other products you might like!
