Product added to cart
Pullman Ermator S26 HEPA Dust Extractor
$2,900.00
In stock
SKU
VP2600
S26 HEPA Dust Extractor #VP2600
- Dual tested and certified cylindrical shaped HEPA filters
- Traps particles as small as 0.3 microns and prevents them from being released into the air
As a business owner, it is important for you to protect your workers from this major occupational health hazard and begin establishing legal groundwork that will prevent future lawsuits.
The first step is to stop your employees from using shop-style vacuums purchased from local home improvement stores and begin using professional HEPA Dust Extractors manufactured by Ermator. Unlike low cost homeowner vacuums, Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site. They can also be connected to electrical power tools to extract the freshly cut and friable concrete dust, considered to be the most hazardous to construction workers.
Features
- Efficient Jet-Pulse filter cleaning
- Conical polyester prefilter
- Individually tested HEPA-13 absolute filters *
- Proactive maintenance with vacuum meter for filter control
- The wheels are of the “non-marking type”, puncture free and lockable at the front
- Dust collection in Longopac bag system
Specifications
Motor (HP): 3.4
Amps: 19.6
Air Flow Capacity (CFM): 258
Water Lift (in): 100
Primary Filter: Cartridge Pre-Filter 18 ft.2
Secondary Filter: HEPA filter 18 ft2
Volts: 120
Net Weight (lbs): 127
| Brand | Ermator |
|---|---|
| Air Filtration Tool Type | HEPA Dust Extractor |
| Motor | 3.4 Hp |
| Airflow | 258 cfm |
| Water Lift | 100 in |
| Current | 19.6 Amp |
| Voltage | 120V |
| Filtration | Primary Filter: Cartridge Pre-Filter 18 ft.2; Secondary Filter: HEPA filter 18 ft2 |
Before use, the user must be trained in handling the machine and the hazardous dust.
WARNING
- Connect the electric plug to a power outlet with the correct voltage, see the nameplate.
- The filter must be cleaned from time to time.
- This must be done before changing the plastic bag and can also be done when the work is complete or when there is poor suction.
Procedure
- Cover the inlet, use attached cover, let the machine build up vacuum for a few seconds then quickly push down on the key and release it.
- Repeat the procedure 4-5 times.
- Turn of the motor and wait until it stops completely, then uncover the inlet. If suction remains poor, the filter should be replaced.
- Only use original parts.
Write Your Own Review
