Ultra-Containment Berms, Stake Wall - 6 ft x 6 ft x 1 ft
- Ultra-Containment Berm, Stake Wall 6 ft x 6 ft x 1 ft
- Perfect for spill sites or containment areas because it allows drums and trucks to roll over the walls without breaking their upright structure
Portable secondary containment berm for drums, frac tanks, equipment and vehicles.
The Ultra-Containment Berm, Stake Wall Model is a portable berm that helps capture leaks, drips, and spills to prevent them from contaminating and polluting the environment.
The stake wall model’s design features flexible polyurethane stakes that allow the sidewalls to spring into place automatically –even after being bent in either direction. This makes it perfect for spill sites or containment areas because it allows drums and trucks to roll over the walls without breaking their upright structure.
Product Highlights
- Easily folds for transport.
- No set-up required - unfold and the sidewalls automatically spring into their vertical position.
Sidewalls
- Vertical sidewall supports located every 12”. Each Support features a built-in “living hinge” at its base, which allows sidewalls to collapse in either direction.
- Collapsed sidewalls spring back automatically.
Compliance
- EPA 40 CFR 264.175 Containment of Containers Containing Free Liquid.
- SPCC - Spill Prevention, Control and Countermeasure Act
Specifications
- Dimensions: 6 x 6 x 1 ft (1.8 x 1.8 x .3) m
- Containment Capacity: 269 gal (1018.3 L)
- Weight: 46 lbs (20.9 kg)
| Brand | UltraTech |
|---|---|
| Type | Containment Berms |
| Style/Model | Stake Wall |
| Dimensions | 6 x 6 x 1 ft |
| EPA Compliant | Yes |
| SPCC Compliant | Yes |
| Containment Capacity | 269 gal |
Procedure for Berm Deployment:
Step 1:
Select a level area and be sure that ground is swept clean of debris and sharp objects. The use of a ground cloth is recommended to prevent puncturing from underneath the berm.
Step 2:
Place the folded berm at the setup location. Do not drag the folded berm. Unfold berm and position as desired. If tread protectors are being used, place these in the unit at this time.
Step 3:
Your berm is ready for use.
Proper Use and Best Practices:
- Enter and exit the berm as perpendicular to the sidewall as possible. Angled entry/exit may cause damage.
- Do not drive over the sidewall (in parallel).
- Drive slowly, avoiding sudden stops or acceleration.
- Avoid excessive turns while on the berm.
Storage
- Sweep out berm and be sure that it is dry and free of contaminants.
- Store unit in clean, dry environment.
