Product added to cart
Sentinel 24-7 Interior Mold and Mildew Resistant Coating
$236.25
In stock
SKU
CHE2190W
Ideal for high traffic interior areas, Sentinel 24-7 Interior is designed to inhibit the growth of stain and odor causing microorganisms such as mold and mildew on cured coating surfaces.
Sentinel 24-7 Interior is a high-quality coating designed for most interior applications. Formulated with the same antimicrobial product protection as our Premium coating, Sentinel 24-7 Interior offers contractors and home owners alike a durable coating that can be tinted to match decor. Ideal for high traffic interior areas, Sentinel 24-7 Interior is designed to inhibit the growth of stain and odor causing microorganisms such as mold and mildew on cured coating surfaces.
Charactersistics
- Percent of Solids/weight: 41.11%
- Percent of Solids/Volume: 30.18%
- Viscosity: 100- 115 KU
- Gloss Level : Egg Shell
- Self Life: Unopened container 2 years
- VOC Content: < 5 g\L
| Brand | Sentinel |
|---|---|
| Chemical Type | Encapsulant |
| Coating | Mold |
| Dilution | Ready-to-Use |
| Packed As | Pail |
| Container Type | 5 gallons |
Application Information (Always follow product label instructions for best results)
Material Preparation
Thoroughly stir and mix coating to achieve an even consistency for spraying, brushing or rolling. Product must NOT be reduced with water or solvents. This product must not be allowed to freeze. Apply in temperatures above 50˚ F.
Surface Preparation
Wash and clean surfaces to remove mold, mildew, grease, dirt and other soils with a suitable cleaning compound like Sentinel 300. Rinse surface thoroughly with water and allow to dry before applying coating. Remove peeling paint, spackle and sand where necessary. Lightly sand all glossy areas. On new, sanded sheetrock surfaces, remove all dust before painting.
Tinting
The white version of this product may be tinted with up to 4 oz. of colorant /per gallon.
Product Application
All surfaces must be clean and completely drybefore applying. To assure proper antimicrobial protection, it is vitally importantthat all surfaces be completely coated with24-7 Interior Coating. For airless applications, use a .015 -.019 tip and maintain a fan size of about 12 inches. Coating applied at 90° to each other ensures a smooth and consistent application.
Primers
On surfaces such as framing lumber, sheetrock and plaster, apply one coat of this product, it has self-priming properties built in. On new woodwork, use an oil-based primer then coat. On metal, use a suitable, rust inhibiting primer then coat.
Dry Time
This product will be dry to the touch in 1 hour and may be recoated in 4 hours.
Coverage
Applied at 3 mils wet.
Smooth Surfaces: 250 - 400 Sq. Ft.
Porous Surfaces: 150 - 300 Sq. Ft.
Warranty
10- Year limited warranty against the visible growth of mold or mildew.
Limitations
This product does NOT protect users or others against foodborne or disease causing bacteria. This product is not designed to be used inareas with temperatures less than 50° F., excessive heat, corrosive chemical environments, or on exterior siding or horizontal floor and deck areas.
Write Your Own Review