Pleated Filter

As low as $54.00
In stock
Only %1 left
SKU
AF0030
The Novatek Square Filter is pleated for optimal high dust capacity, with a low airflow resistance to maintain a higher air quality. It is a great fit for Novair 700. 12ea/case.

The Novatek F4720 Pre-Filter is pleated for optimal high dust capacity, with a low airflow resistance to maintain a higher air quality. It is a great fit for the Novair 700 Air Scrubber.

  • 12ea/case
  • Height: 2”
  • Low airflow resistance
  • High dust control capacity
More Information
Brand NC Filtration
Dimensions 16" X 16" X 2"
Air Filter Type Square Filter
Air Filter Usage For Novair 700
Fits Novair 700
Write Your Own Review
Write a ReviewPleated Filter

Replacement of Filters

The work atmosphere will impact the frequency of filter replacements. Once the filters load and the pressure reaches approximately 3” the visual alarm will light.

CAUTION: Always wear approved respirators and personal protective equipment during filter replacement. Please observe all Federal, State, and Local regulations regarding the handling and disposal of hazardous materials.

Pre- Filter Replacement

  1. Set the variable speed and circuit breaker power switches to the off position. Disconnect power supply.
  2. Remove inlet panel to expose the pre and pleated filters.
  3. Reach in and remove the pre-filter and dispose of pre-filter accordingly.
  4. Replace the discarded pre-filter with a new pre-filter.

Pleated Filter Replacement

  1. Follow steps A-D listed above referencing Pre-Filter replacement
  2. Reach in and remove the pleated filter and dispose of pleated filter accordingly.
  3. Replace the discarded pleated filter with a new unused pleated filter.
  4. Reinstall the pre-filter.
  5. Reinsert the inlet panel.
  6. Plug in power cord to 115v grounded outlet and turn the circuit breaker to the “ON” position. Turn the variable speed controller to the “High” position. If the visual alarm light is still on the HEPA filter should be inspected.
To Top