Omega Glove Bag Vacuum
The Omega Abatement 1 Gallon HEPA dry particulate vacuum is made from high impact Starex flame retardant polymer for durability and long life. It also features over-heat protection.
The Atrix Omega Plus H14 ULPA (Ultra Low Penetration Air) vacuum VACOMEGAU is an excellent immediate containment option for glove bag, abatement, and hazardous particulate applications. This ULPA vacuum offers self-storage and contained accessories, 1,000 hour rated Ametek® Advantek II motor, and 10’ detachable power cord. The one-gallon ULPA filter is 99.999% efficient at .12 micron and includes three layers of 56 pleat media. The three layers consist of one cellulose layer and two glass layers. This vacuum includes hose and filter plugs so no debris spills out during transport or storage. The tool box structure and self-contained accessories makes this vacuum convenient for mobile technicians.
Excellent portable choice for hazardous particulate cleanup. The Omega Abatement 1 Gallon HEPA dry particulate vacuum is made from high impact Starex flame retardant polymer for durability and long life. It also features over-heat protection. Filtration - A self contained HEPA filter cartridge for lead dust, mold spores, etc., reduces the risk of particle dispersion. The cartridge filter makes filter changes easy, clean, and safe. Powerful and Quiet. Get the job done quickly and quietly! 16” flexible wand is pliable and will fit into hard to reach places.
- True HEPA Filter
- Portable
- Hose and Filter Plugs for Safety
- Powerful 1,000 Hour Motor
- Quiet
- ULPA Efficiency: 99.99% @ .12 micron
| Brand | Atrix |
|---|---|
| Air Filtration Tool Type | Glove Bag Vacuum |
| Motor | 1,000 Hour Motor |
| ULPA Efficiency | 99.99% @ .12 micron |
| Filtration | HEPA Filter |
| Equipment Features | Portable |
Operation Instructions:
- Release the two front fasteners and open the lid.
- Remove hose, power cord, and attachment from cover storage area.
- Remove the orange plug from the filter cartridge and store in unit.
- Slide one end of the super flex hose into the filter cartridge.
- Attach appropriate accessories on the hose assembly.
- Plug the female end of the power cord into the receptacle on the vacuum.
- Close lid and latch securely.
- Plug the power cord into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
- Turn on the power switch.
- These vacuums have a factory installed resettable Thermal Cutout (TCO) for added operator and motor safety. If the unit gets too hot, the
vacuum will shut down for approx. 20 minutes. Turn the on/off switch to the off position, and turn back on in approximately 20 minutes.
Your hose may be clogged, or it may be time to install a new filter.
Filter Change-out Instructions:
- Release the two front latches and open the lid.
- Insert the orange plug into the filter cartridge.
- Lift the filter cartridge out by placing fingertips under lifting tabs located on the ends of the cartridge and lift up.
- Push orange plug all the way in.
- Dispose of the filter cartridge in an appropriate manner compliant with all local, state, and federal laws.
- Insert new filter cartridge.
- Close lid and latch securely.
