Peel Away Smart Strip

$72.80
In stock
Only 2 left
SKU
CHS0541-1

A revolutionary paint remover designed to remove post-1980 coating systems consisting of oil, latex, and acrylic-based coatings, stains, and varnishes in one application.

1 Gallon Pail

Smart Strip Advanced Paint Remover strips multiple layers of oil, latex, and acrylic-based paints, varnishes, stains, and coatings, usually in a single application. Versatile enough to work on virtually all interior and exterior surfaces: wood, brick, stone, metal, marble, terra cotta, granite, terrazzo, concrete, plaster, cement, copper, tin, enamel, slate, cast iron, and more! Functions best on post 1980’s paints and coatings.

Smart Strip Advanced Paint Remover is easy to use. A product test before you begin will help determine the best dwell time for your project. Simply apply Smart Strip to the desired area for removal and let Smart Strip do its work for up to 24 hours. Remove with a scrapper or pressure washer and clean area thoroughly with water. It’s that simple!

Smart Strip Advanced Paint Remover has been trusted to handle major restoration projects on historic buildings and landmarks, government facilities, and opera and music halls worldwide! Unlike other paint removers, Smart Strip does not contain dangerous Methylene Chloride or hazardous NMP. Perfect for Do it Yourself projects!

Main Features & Benefits

  • User-friendly stripper designed to remove post-1980 coatings
  • Removes oil, latex, and acrylic based coatings, varnishes, and stains
  • Does not contain methylene chloride or caustic chemicals
  • Removes up to 15 coats in one application
  • Ideal for wood, brick, stone, and metal. See full list under “Recommended Substrates”
  • Water-based, zero VOC formulation, biodegradable, pH neutral, non-carcinogenic
  • Non-flammable; no harmful odors or fumes
  • Easy brush or airless spray application. Suitable for interior and exterior applications
  • Use in conjunction with Dumond® Laminated Paper
More Information
Brand Dumond
Write Your Own Review
Write a ReviewPeel Away Smart Strip

Application

Step 1: Ensure a test was completed prior to a full scale-application. Clean the surface to remove any loose debris and coatings. Cover all areas where stripping is not desired. Smart Strip® covers 40 – 50 sq. ft. per gallon.

Step 2: Apply Smart Strip® approximately 1/8” thick with a brush or airless spray unit. In temperatures above or below 40° F and 90° F, apply at a minimum 1/8” thick. Do not allow Smart Strip® to harden. Dumond® Laminated Paper is not always required for Smart Strip® to work, but Dumond® always recommends using it to enhance product efficiency. Apply the Dumond® Laminated Paper over the Smart Strip® paste and smooth to ensure there are no visible air pockets.

Airless Spray Specifications

Use an airless sprayer that can pump 0.75 gallons per minute or greater. Dumond® recommends using a 3/8” hose to reduce strain on the sprayer; however, a 1/4” hose will work. Use a .21 to .25 tip size. Apply Smart Strip® from the bottom up at 1/8” thick. Flush sprayer with water after application. Do not leave Smart Strip® in spray line overnight.

Step 3: Allow at least 1 – 24 hours to Smart Strip® to work, according to successful test results. Once ready to be removed, use a scraper or pressure washer to remove product. Remove by inserting a trowel, spatula, or paint scraping tool underneath the paste and lift the Dumond® Laminated Paper while slowly scraping. To ensure exposed product does not dry, only remove, scrape, and clean 1-2 sq. ft. of area at a time. Scrub all surfaces clean with a sponge or nylon bristle bush and water. Rinse thoroughly with water to ensure all remaining residue is removed. Collect paint and product residue in plastic bags and dispose of in compliance with federal, state, and local regulations.

Best Practices and Fixes

  • Always test each type of surface and paint coating before a full-scale application
  • Apply 1/8” thick and cover with Dumond® Laminated Paper
  • Never apply Smart Strip® and leave it for longer than 24 hours without checking on it. If the product dries, it will harden and adhere to the substrate. If this happens, remove as much Dumond® Laminated Paper as possible, and apply more Smart Strip® to the surface to reactivate the dry material. Let sit for 1 – 2 hours and fully remove.

Attachments

To Top