Pullman-Holt 45HEPA Dry HEPA Vacuum - 10 Gallon Cap.
Pullman Holt Model #45HEPA-10TT
Designed for professional cleaning in abatement, restoration and construction job sites, the model 45HEPA is compact and portable. It also meets the latest EPA regulations for recovering lead dust.
Pullman Holt HEPA VAC DRY 2HP 10GL 45HEPA-D - Item VP1000
Equipped with a powerful 2-hp motor and an extra large capacity HEPA filter system, the model 45 offers the air flow efficiency of vacuums costing three times as much. The model 45 is manufactured to the same high standards as our large, so it will withstand years of hard use.
Designed for professional cleaning in abatement, restoration and construction job sites, the model 45HEPA is compact and portable. It also meets the latest EPA regulations for recovering lead dust.
Features
- High efficiency 'Drop-in' style HEPA filter individually certified to have a minimum efficiency of 99.97% at .3 microns (based on 1EST-RP-CC007 particle count test method).
- Includes Pullman-Holt's exclusive 'never-clog' dacron bag for superior pre-filtration.
- Blow molded poly canister with low center of gravity design prevents tipping.
- Positive locking, full swivel hose connection system for easy handling and operation.
- Low noise allows for use in sound sensitive areas.
- Includes complete set of tools.
Tool kit includes
- 10 ft. x 1.5 in. crushproof hose
- 5 ft. two-piece metal wand
- 17in. crevice tool
- Floor brush tool
- Round dusting brush
Specifications
- Style: Wet/ Dry
- Horsepower: 2
- Waterlift: 105"
- CFM: 110
- Recovery: 10 gallon dry
- Power Cord: 50 ft.
- Shipping Weight: 38 lbs.
- Net Weight: 33 lbs.
- Product Code: B100481
| Brand | Pullman-Holt |
|---|---|
| Air Filtration Tool Type | HEPA Dry Vacuum |
| Motor | 2 Hp |
| Equipment Style/Type | Dry Vacuum |
| Water Lift | 105 Inch |
| CFM | 110 |
| Recovery | 10 gallon dry |
| Hose Diameter | 1.5 Inch |
| Current | 11.1 Amp |
| Voltage | 110V |
| Cord Length | 50 Feet |
| Equipment Features | Has Tool Kit |
To Connect the Hose:
Insert the hose end into the tank inlet until it clicks. To remove the hose, press the button on top of the hose inlet, and remove hose.
To Operate:
The vacuum cleaner is designed to perform as a wet/dry unit. The cloth bag is used for dry operation only and must be removed from the tank prior to wet pickup.
Assembly Instructions:
Insert casters into sockets on bottom of canister. Push casters until seated. Attach hose to coupling on front of can.
Maintenance
This vacuum cleaner contains no user serviceable parts. If repair is needed, please take the vacuum cleaner to an authorized Pullman-Holt factory service center.
For Dry Pickup
Install paper bag on inlet inside of tank.* Insert the cloth fi lter assembly in the top of the tank. Install motor head. The cloth fi lter located inside the can provides highly efficient separation of dust and dirt particles from the incoming air stream.
Caution
During dry operation, never operate the vacuum cleaner unless the cloth fi lter is in good condition and properly asembled to the vacuum head.
