Carpet Shield Self-Adhesive Film - 24" x 200 '
Carpet Shield is a clear plastic carpet protection film designed for floor protection that keeps your floors and carpets clean and damage-free while building, remodeling, moving, or painting.
24” x 200’ Clear, 6 lbs. Reverse Wound
Carpet Shield is a clear plastic carpet protection film designed for floor protection that keeps your floors and carpets clean and damage-free while building, remodeling, moving, or painting.
This self-adhering carpet protector is recyclable, heavy-duty, liquid resistant, non-slip, highly resistant to tears and punctures making it a great temporary floor protector for high foot traffic areas and stairs. It is ideal during renovations, remodeling, painting and moving, and the easy application minimizes clean-up time and damage claims.
Carpet Shield provides temporary carpet protection for up to 30 days and leaves no adhesive residue when removed.
Specifications
Thickness: 2.5 mil nominal Film: Low Density Polyethylene Adhesive Type: Formulated Acrylic Adhesion Level: 17-25 oz/in Tensile Strength: 3000 psi Temperature (Ideal): 70° F Humidity (Ideal): 50% Elongation MD: 350% – 500% Chemical Name: Acrylic PSA Tapes Chemical Family: Acrylic PSA Polyethylene Film Chemical Formula: Proprietary Trade Name: Carpet Shield® Material Use: Surface Protection
| Brand | Surface Shields |
|---|---|
| Width | 2in |
| Length | 200ft |
| Features | Moisture Resistant, Water-resistant |
| Usage | Surface Protection |
| Film | Low Density Polyethylene |
| Tensile Strength | 3000 psi |
| Recyclable | Yes |
| Adhesive Type | Formulated Acrylic |
| Temperature (Ideal) | 70° F |
| Humidity (Ideal) | 50% |
| Thickness | 2.5 Mil |
| Material | Polyethylene |
| Adhesion Level | 17-25 oz/in |
Peel back edge of Carpet Shield and begin to unroll. Press down edge at beginning of area to be covered so Carpet Shield adheres. Continue rolling onto carpet, applying pressure and smoothing down the film while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the film back against the roll to use at a later time. Removal: roll up Carpet Shield and discard.
Handling And Storage
Do not apply to hardwood floors or other hard surfaces. Always test Carpet Shield on a small portion of carpet that is in a non-exposed area. 72 hour test required for use over adhesive installations. Temporary protection for up to 30 days. Recommended for synthetic carpeting only. Apply only to dry carpet, do not use under damp conditions.
