Product added to cart
Ultra-Containment Berms, Ultimate Model 15 ft x 50 ft x 1 ft - Item #SC8506
$6,624.45
In stock
SKU
SC8506
- Ultra-Containment Berm, Ultimate Model 15 ft x 50 ft x 1 ft
- Convenient and economical spill containment for drums, IBCs, vehicles, equipment, frac tanks, and other large containers
Unique, living hinge design allows hands-free drive in/drive out—no need to manually raise or lower the endwalls
The Ultra-Containment Berm, Ultimate Model is the perfect combination of convenience and economy when it comes to capturing leaks and spills that often occur during equipment maintenance or the transportation of containment drums. This spill containment berm features 12” walls that are supported with a unique “living hinge” that gives them the ability to bend under equipment and snap back into place.
Product Highlights
- No need to manually raise or lower the end walls.
- Once a vehicle has entered or exited, the walls automatically spring back to their vertical position.
- Both long sidewalls are held upright by PVC sidewall assemblies. Simply swivel the feet to lower the sidewalls for storage or transport to another location.
- Convenient and economical spill containment for drums, IBCs, vehicles, equipment, frac tanks, and other large containers.
- Available in Copolymer 2000™ and other rugged materials.
Sidewalls
- Entry and exit walls are supported every 12” with a patented “living hinge”.
- Once a vehicle has entered or exited, the walls automatically spring back to their vertical position.
- No set-up required once Berm has been positioned in the fi eld.
Compliance
- EPA 40 CFR 264.175 Containment of Containers Containing Free Liquid.
- SPCC - Spill Prevention, Control and Countermeasure Act
Specifications
- Dimensions: 50 x 15 x 1 ft (15.2 x 4.6 x .3) m
- Containment Capacity: 5610 gal (21236.2 L)
- Weight: 326 lbs (147.9 kg)
- Part #: 8506
| Brand | UltraTech |
|---|---|
| Type | Containment Berms |
| Style/Model | Ultimate |
| Dimensions | 50 x 15 x 1 ft |
| EPA Compliant | Yes |
| Material | PVC |
| Containment Capacity | 5610 gal |
Set Up and Handling
The rugged construction of the Ultra-Containment Berm, Ultimate Model offers excellent chemical resistance and durability. To ensure the longest life and most effective use of the Ultimate Model Berm, setup and handling are key.
The following guidelines are provided to ensure that you get the best results.
Deployment:
- Select a level area and be sure that ground is swept clean of debris and sharp objects.
- The use of a ground tarp is recommended.
- Place the folded Berm at the setup location. Do not drag the folded Berm. Unfold Berm and position as desired. Position the frame legs facing toward the inside of the Berm. On the shorter ends insert the green urethane stakes through the oval shaped holes in the bottom of the Berm, through the black polyethylene base plates and into the pockets at the top of the wall. Firmly seat stakes. (This step is required only at first setup.)
- If Track Belts are being used, place these in the unit at this time.
- The Berm is ready for use.
Storage:
- Sweep out Berm and be sure that it is dry and free of contaminates.
- Store unit in clean dry environment.
Repair and Maintenance:
- If a puncture or tear occurs, contact your distributor for a Repair Kit. Describe the damage to the service representative to ensure receipt of the proper kit.
- Replacement frame assemblies and urethane stakes are available from your distributor.
Miscellaneous:
- While the berm will perform properly with liquids reaching the top of the wall, it is suggested that the recommended fi ll line not be exceeded. The fi ll line is 1” below the top of the berm. A berm that is fi lled to the top edge of the wall is subject to splash over in the
event of wind or being bumped etc. - Only Forklifts with pneumatic tires should be run over frames
Write Your Own Review