Product added to cart
12 Gun Foam II Fireblock Foam - 12 per case
$139.50
In stock
SKU
MS0172 CASE
The Touch ‘n Seal Gun Foam II is an ICC code complying fireblock penetration sealant suitable for Type V residential constructions.
Gun Foam II Fireblock Foam 24 oz. - 12 per case
Touch ‘n Seal Gun Foam II polyurethane foam is a high-performance, one component, approved Type V Residential Fireblock sealant for use in filling annular spaces around penetrations for approved fire blocking performance as an important part of residential fire safety.
Used around pipe and conduits, the bright orange Gun Foam II permanently air seals and insulates gaps and cracks up to 1-1/2” (38 mm) wide blocking drafts, moisture, insects while improving comfort and reducing energy usage in commercial, industrial, agricultural and residential applications.
Gun Foam II can be used on wood, masonry, insulating foam boards, metal, plastics and sheetrock.
Features & Benefits
- Packaged in 24 oz. can
- Yield (¼" bead) - 3,200 linear feet
- Type V residential fire block sealant
- Distinctive orange color
- Class A fire resistance
- Flame Spread - 15
- Smoke Developed - 25
- Density - 1.3-1.8 lbs./cu.ft.
- R Value - 7.12 per inch thickness
- Max. Service Temp for Cured Foam - 250ºF (121ºC)
- Shelf Life - 18 months in unopened container
- ICC-ES ESR-1926 approved
- Tack-Free/Dry Time - 10 minutes
- Full Cure Time - 1 hour
| Brand | DAP |
|---|
Always review and follow the directions provided in your foam kit. The below instructions are a general overview. Ensure you follow all safety precautions including wearing protective eyewear and gloves.
- Apply petroleum jelly to gun basket before attaching can.
- Point gun in a safe direction (into a trash can), depress trigger and screw can onto gun basket. Do not over-tighten.
- After attaching gun to can, shake vigorously for 30 seconds.
- Press trigger to dispense foam with can upside down. Test bead size on scrap material.
- Fill cracks and gaps as needed, allowing space for foam expansion.
- Foam can be trimmed, painted, sanded or plastered after curing completely.
Can Replacement:
- Point gun in safe direction, depress trigger and quickly remove empty can.
- Spray gun basket with PolyClean gun cleaner and immediately attach a new can to prevent foam from hardening in the gun.
- Follow directions above.
Storage:
- Turn off gun flow control knob at back of gun.
- Store can upright with gun attached.
- To restart, shake well for 30 seconds, open flow control knob and dispense foam. Maximum storage: 15 days.
Write Your Own Review