HEPA Filter-Wooden 16" X 16" X 11.5"/Ea

Wooden HEPA Filter 16" x 16" x 11.5"

This standard capacity 16" x 16" wood replacement HEPA filter fits within most air scrubbers and negative air machines. It provides true HEPA filtration of 99.97% efficiency against particles 0.3 microns or larger.

Construction

• Media:  Each filter is constructed from one continuous sheet of high strength waterproof glass microfiber paper, sealed to the frame on all four edges.
• Separators: Media separators are corrugated aluminum.  A separator is placed between each pleat of media to prevent the pleats from touching.  This allows the air to pass through with minimum of resistance.
• Adhesive Sealants:  Standard sealants utilized are fire retardant rubber bade adhesive and urethane sealant.  These sealants are applied as a fluid and solidifies to provide a positive seal between the media pack and frame.
• Gaskets:  All standard HEPA filters are equipped with a closed cell neoprene gasket.  Placement is on the Downstream side of the filter unless otherwise specified.  If a gasket is required on both sides of the filter it must be indicated in the purchase order.

Specifications

• Filter Media:  Glass Microfiber
• Efficiency:  99.97% @ 0.3 Microns
• Frame:  Particle board 5/8"
• Separators:  Corrugated aluminum media
• Capacity:  Standard (18 pleats/ft.)
• Sealing:  Internally with Urethane Sealant 
• Dimensions:  16 x 16 x 11.5"
• Fits:  Novair 1000