Give Us A Call: (800) 872-3684

Nilfisk Euroclean GD 930 HEPA Vacuum

Rating:
100 % of 100
$761.00
In stock
Only 1 left
SKU
VF0164

The Euroclean GD930 is our biggest, most powerful, best performing canister vacuum, making it your reliable partner for demanding cleaning applications in hotels, schools, offices, hospitals and more.

The Euroclean GD930 is our biggest, most powerful, best performing canister vacuum, making it your reliable partner for demanding cleaning applications in hotels, schools, offices, hospitals and more.

Benefits of Euroclean GD930 Canister Vacuum Cleaners

The rugged and reliable Euroclean GD930 comes equipped with a large 4 gal. dump bag with either standard or high filtration, a 1,000 hour, 1.25 hp 1,000W motor for high performance day in and day out, a steel body designed to take years of abuse, and a tough, lightweight aluminum wand attached to a six foot hose for a huge cleaning radius.

  • Invest in a vacuum that’s built to last — rugged steel body, high quality components, 1,000 hour motor and tough aluminum wand
  • Clean longer without changing bags thanks to the large 4 gal. dust bag
  • Provide the best indoor air quality with the standard HEPA H13 filter or optional oversized true DOP MILSTD- 282 HEPA filter
  • Increase your cleaning productivity with more shear power in terms of waterlift and airflow than any other Advance canister vacuum
  • Clean during the day with one of the quietest professional vacuum cleaners in the world

 

More Information
Brand Nilfisk
Dimensions 17.5" x 15" x 13"
Air Filtration Tool Type HEPA Vacuum
Motor 1.25 Hp
Watts 1000 Watts
Filtration HEPA H13 filter
Write Your Own Review
Write a ReviewNilfisk Euroclean GD 930 HEPA Vacuum

1. To open
a) Pull the retaining clips upward and outward .
b) Lift the cover from the container.

2. Dust bag
Fit the opening on the dust bag over the air inlet. Press the membrane over the flanged edge on the inlet. Secure with the lock washer. Use only original dust bags.

3. Hose connection
Push the hose coupling all the way in and turn clockwise.

4. Wand assembly
a) Telescopic: Push down the catch and then adjust the length. Max.950mm,min.630mm.
b) Standard: Fit the sections together and twist to lock in place.

5. Tools
The accessories shown in the pictures may vary from model to model.

a-b) Combination nozzle
Adjust the nozzle according to the requirements of the floor you are cleaning. Work with the brush on hard floors and without it on soft floors.

c) Universal nozzle
for both hard floors and carpets.

d) Crevice nozzle
Use to clean furniture, radiators and others hard-toreach places.

e) Small combi-nozzle:
The small combi-nozzle combines a dusting brush for furniture, picture frames, mouldings etc. with a fold-out nozzle for cleaning curtains, furniture and
other soft surfaces. The clip on the hose handle holds the nozzle when it is not in use.

6. Suction control
The suction control in the hose handle lets you regulate the air-flow to prevent the nozzles from fastening to the surfaces you are vacuum cleaning.

7. Start/Stop
a) Foot-operated on/off switch.
b) On the S 2 version a separate switch is provided to change the motor speed .
c) Plug-in point for powered carpet nozzle. Power is supplied to the socket when the machine is switched on.

8. Warning!
Never attempt to vacuum liquid, glass fragments or ashes! Wet surfaces can expose the operator to possible electrical shock.

9. Filter
The filters are located inside the lid. To reach them lift out the filter holder (a). The standard filter(b) and fine filter (c) should be inspected at regular intervals, e.g. when you change dust bags, and replace if necessary. Instead of these two filters you can fit a micro filter of HEPA-quality (e), wich traps 99,99% of all particles larger than 0,3 microns. The machine is also fitted with a backupp filter (d) located above rhe motor. This filter should also be inspected and replaced if necessary.

Remove the plug from the socket before performing service or maintenance.

Attachments

To Top