Product added to cart
Pullman Holt 2 HP 12 Gal Wet/Dry HEPA Vac
$1,465.20
In stock
SKU
VP2020 AND VP1029
Pullman Holt Model #102ASB WD #VP1020
The 102HEPA-Wet/Dry offers superior vacuum recovery, ranging from dry, light particulates, to wet, heavy debris; hazardous materials such as asbestos, lead, concrete/silica dust, etc.
Our popular 2-hp, 2-stage long-life motor makes this HEPA vacuum a true 'work horse' for heavy duty service in professional abatement work. The 102HEPA-Wet/Dry offers superior vacuum recovery, ranging from dry, light particulates, to wet, heavy debris; hazardous materials such as asbestos, lead, concrete/silica dust, etc.
Features
- High efficiency 'Drop-in' style HEPA filter is individually tested and certified to have a minimum efficiency of 99.97% at .3 microns (based on 1EST-RP-CC001 particle count test method).
- Air seal gasket between the motorhead and tanks forms a positive lock fit.
- Polyester prefilter is located on the bottom of the HEPA filter, and is held firmly in place with Velcro fasteners.
- A Dacron filter bag covers the entire spacer sleeve and HEPA filter for three-stage filtration. Dacron material sheds dust to maintain maximum vacuum efficiency.-
- Heavy duty poly tank with large dump valve and vacmobile molded handle and cart for easy transport
- 25 foot power cord.
Tool Kit Includes
- 10 ft. x 1.5 in. crush-proof hose
- 5 ft. two-piece metal wand with swivel end
- ABS floor brush tool
- ABS floor squeegee tool
- Dusting tool
- 17 in. crevice tool
Specifications
- Motor HP: 2 HP
- Power Supply (Volts): 110V
- Power Supply (Amps): 11.1
- Power Cord Length: 25 ft.
- Air Flow: 110 CFM
- Waterlift: 105"
- Noise Level: n/a
- Capacity: 12 Gallons
- Has Tool Kit: Yes
- Hose Diameter: 1.5"
| Brand | Pullman-Holt |
|---|---|
| Air Filtration Tool Type | HEPA Vacuum |
| Motor | 2 Hp |
| Equipment Style/Type | Wet/ Dry Vacuum |
| Water Lift | 105 Inch |
| CFM | 110 cfm |
| Recovery Tank Capacity | 12 gal |
| Hose Diameter | 1.5 Inch |
| Current | 11.1 Amp |
| Voltage | 110V |
| Cord Length | 25 Feet |
Vacuum Assembly Guide:
- Remove and carefully set aside motor head and HEPA filter.
- Position 8” rear wheels and insert 3/8” x 3 1/4” mounting bolts through the wheel and frame. Secure with 3/8” lock nuts.
- Insert and push casters into the holes located at the front of the vacmobile metal frame.
- Lock the casters in place with the hub nuts, using a rubber hammer.
- Replace motor head and filter.
For Wet Operation:
With HEPA filter and water pick-up pan in place, securely clamp motor head to the spacer. When the maximum water level in the vacuum cleaner polytank is reached the water pick-up pan’s safety valve (float) closes off suction, automatically preventing further liquid intake.
NOTE: This will cause the motor to race. Turn off motor, remove and empty poly tank. Thoroughly clean float assembly. Replace water pick-up adapter, HEPA filter and motor head, then clamp securely. The vacuum cleaner is ready for wet use.
For Dry Operation:
With the HEPA Filter Assembly in place, the motor head securely clamped,and the metal hose adapter connected to the inlet,plug the power cable into the proper outlet. Select the appropriate hose, wand and/or tool and connect to the hose adapter. The vacuum cleaner is ready for dry use.
Write Your Own Review
Related Products
We found other products you might like!
